Special Customized Chuck

Machine Tools Top  >  Designed Chuck  >  Special Customized Chuck

Special Customized Chuck

  • O.D Collet Chuck with Chattering Prevention
  • S Type Collet Chuck with Finger
  • Lever Clamp Chuck
  • Automatic Eccentric O.D Collet Chuck
  • Face Clamp Chuck
  • Hybrid Chuck
  • Drive Carrier
  • Double Taper Collet Chuck

O.D Collet Chuck with Chattering Prevention

O.D Collet Chuck with Chattering Prevention

Feature
In addition to the chucking portion, it holds a workpiece in such a way as to wrap the outside diameter.
Advantage
The workpiece is less deformed and chatter is reduced by holding the outside diameter with pneumatic drive.
Clamping Work
Ex) Torque converter

S Type Collet Chuck with Finger

S Type Collet Chuck with Finger

Feature
Workpiece is centered with the collet and clamped at the end face.
Advantage
Parallelism between the reference surface and machined surface can be secured due to end face clamping. If it is used in combination with a triple chuck cylinder, the inside diameter of a workpiece can be machined by moving the inside diameter collet into the chuck after clamping the workpiece end face.
Clamping Work
Ex) Ring gear,Front cover,Cover oil case

Lever Clamp Chuck

Lever Clamp Chuck

Feature
By changing the lever ratio, it can cope with long stroke as well as workpieces which cannot be clamped with three jaws.
Advantage
It can cope with irregular shaped workpieces.
Clamping Work
Ex) Nozzle, tee piping, L-shaped connector

Automatic Eccentric O.D Collet Chuck

Automatic Eccentric O.D Collet Chuck

Feature
The drive cylinder is mounted to the machine and performs eccentric machining combined with spindle orientation. Since automatic balance weight is included in the chuck body, weight adjustment when eccentricity occurs is not required.
Advantage
One machine can cope with two different eccentric amounts.
Clamping Work
Ex) Crankshaft,Cam

Face Clamp Chuck

Face Clamp Chuck

Feature
Workpiece reference is located in front of the chuck. A workpiece is inserted from the side of the chuck and the inside diameter is machined.
Advantage
By clamping the end face, the roundness of the inside diameter of a cylindrical workpiece is improved.
Clamping Work
Ex) Socket

Hybrid Chuck

Hybrid Chuck

Feature
A mobile outside diameter clamp and a face clamp are combined in this chuck.
Advantage
Coexistence of the face clamp and the outside diameter clamp increases the rigidity of workpieces, leading to deflection prevention and cycle time reduction. Furthermore, a shaft outside diameter can be machined entirely in one process.
Clamping Work
Ex) Output Shaft,Input Shaft

Drive Carrier

Drive Carrier

Feature
It drives a workpiece with a hooking jig while supporting it with both centers.
Advantage
Since the workpiece is not clamped, it is not distorted and the runout accuracy against both centers is high.
Clamping Work
Ex) Rear axle shaft、Crankshaft for motor cycle

Double Taper Collet Chuck

Double Taper Collet Chuck

Feature
The collet has tapers in the front and rear side and the both ends of a workpiece are clamped by them.
Advantage
By clamping the both ends of a workpiece, tilting of workpiece is prevented and holding rigidity is increased.
Clamping Work
Ex) Liner,Sleeve

Phone/0565-76-2297 FAX/0565-76-2971

Contacts

PAGE TOP